The usage methods are as follows: 1, close the big ball valve, open the small ball valve, fill the compressed air pipe in the air compressor with a quick joint into the exploder, and pay attention to the pressure not to exceed 8KG in the air compressor. Our tool set pressure to 8kg should not exceed 10kg at most. 2, face down the top of the ring and lay the tire flat on the ground. 3, take the exploder to the side of the tire and touch the black duck mouth tightly with the steel ring, against the edge of the ring, and touch the tire with the pointed piece of iron under the duck mouth bar. 4, one side inflates the tire with the inflatable rod, on the other hand operates the tool to open the ball valve instantly, the high pressure gas in the exploder will fill the tire in the instant, so that the tire and the steel ring will be sealed immediately and the explosive charger will be removed. At this time, the sealed tire can be inflated until the full tire, the end of the work. If it will not be used, please call 4008710818 for notes: 1, the pressure in the exploder must not exceed 8KG, if the pressure exceeds 8KG, the safety valve on the exploder will automatically open to ensure the safety of the person. 2, the position of the tire should be accurate, the top of the ring must face down. 3, the black outlet angle is more important, must let the gas can enter the tire, the hand that holds the explosive charger must work hard, because when opening the ball valve, there will be a backlash force, to ensure the safety of the person. 4, ear protectors and safety glasses are recommended when using the exploder.